Makes a loose-flange joint
The collar provides the sealing face of a flanged joint on a stainless pipe, and a loose flange behind it carries the bolts.
Pipe Support Components
Stainless Steel Collars (For Flanges)
Stainless Steel Collars (For Flanges) are formed stub ends welded to the end of a stainless pipe. A loose backing flange slides over the collar and clamps the joint, so only the stainless collar touches the fluid and the flange can turn to line up its bolt holes. Specify pipe size, thickness, grade and the quantity you need.
At a glance
Stainless Steel Collars (For Flanges) at a glance.
304, 304L, 316 and 316L
Collars are formed in the grade of the pipe; the low-carbon L grades are chosen for welded joints.
1/2 to 24 in, 2 or 3 mm
For 1/2–24 in (15–600 mm) pipe, 11G or 12G (2 or 3 mm) wall, to MSS SP-43 (Schedule 5S and 10S) or ASME B16.9 stub-end dimensions or to drawing, in 304, 304L, 316 and 316L.
Also known as
Stainless Steel Collars (For Flanges) are stub ends, lap joint stub ends in the UK and stub flanges in Australia; in other languages they are collet (French), Vorschweißbördel (German), cartella (Italian) and valona (Spanish).
- English
- UK & Ireland
- Australia & NZ
- Français
- Deutsch
- Italiano
- Español
Weld the collar, bolt the loose flange
The backing flange is slid onto the pipe first. The collar is then butt-welded to the pipe end. At assembly the flange is turned until its holes line up with the mating flange, a gasket goes between the two collar faces, and the bolts clamp the flanges together over the collars.
Common applications
Where it is used.
Food, dairy and drinks plants
Stainless lines that are opened for cleaning use loose-flange joints. Only the collar and pipe touch the product.
Water and chemical treatment
Treatment and dosing lines in 316 or 316L use collars with galvanized or coated steel backing flanges. The flange stays out of the fluid.
Thin-wall process pipework
Schedule 5S and 10S stainless pipe is joined with formed collars. The lightweight joint suits thin-wall lines.
Questions answered
Common questions.
What are stainless collars for flanges called in other markets?
In the US they are stub ends, in the UK lap joint stub ends and in Australia stub flanges. In other languages they are a collet in French, a Bördel or Vorschweißbördel in German, a cartella in Italian and a valona in Spanish.
Why use a stub end and loose flange instead of a welded flange?
Only the stainless collar touches the fluid, so the backing flange can be carbon steel, and it turns freely to line up its bolt holes during assembly. Corona makes the collars in 304, 304L, 316 and 316L for 1/2 to 24 in (15 to 600 mm) pipe.
The collar in a loose-flange joint
Stainless Steel Collars (For Flanges) form the joint faces; the loose flanges, gaskets and bolts come from other suppliers.
See the pipe support rangeStainless Steel Collars (For Flanges) specifications
Stainless Steel Collars (For Flanges) configuration
ParameterUS / PrimaryMetric / Additional
Nominal Pipe Size1/2" - 24"15 mm - 600 mm
Thickness11G, 12G2 mm, 3 mm
PatternStub ends to MSS SP-43 (Schedule 5S, 10S) or ASME B16.9, or to drawingStub ends to MSS SP-43 (Schedule 5S, 10S) or ASME B16.9, or to drawing
MaterialStainless Steel - 304, 304L, 316, 316LStainless Steel - 304, 304L, 316, 316L
Pipe Support Systems
Related components
Pipe Support Components
Pipe Clamps
Nominal Pipe Size: 1/2" - 30" / 15 mm - 750 mm · Thickness: 0.120" - 0.790" / 3 mm - 20 mm
Specifications
Pipe Support Components
Sump Receiver (Finish: Zinc Plated, Powder Coated)
Plate: Square, 16 x 16 in to 24 x 24 in; to drawing / 400-600 mm · Opening: Raised round collar sized to the drain body
Specifications
Pipe Support Components
Threaded Rods / Bars
Diameter: 1/4" - 2-1/2" / M6 - M60 · Length: 2 ft - 19 ft (3, 6, 10, 12 ft common) / 1 m - 5.8 m (1, 2, 3 m common)
Specifications