Screw Jack with Base Plate & Wing Nut

Screw Jack with Base Plate & Wing Nut is the adjustable base that levels cuplock and system scaffold standards on uneven ground. The wing nut runs on the hollow or solid stem to set the height, and the base plate spreads the load onto the ground. Specify diameter, thread type, plate size, finish and the quantity you need.

Request a quote Contact sales

At a glance

Screw Jack with Base Plate & Wing Nut at a glance.

Function

Raises or lowers each standard foot

Turn the wing nut to raise or lower the stem until the standard sits plumb. The base plate distributes the load of the standard and its bay of scaffold across the ground surface.

System role

Foot of cuplock standards, leveler of platform rails

Each cuplock standard rests on a base jack in its bay. On working platforms built on tube-and-fitting scaffolds, the jacks under the support rails bring the platform level to the working height.

Product form

Stem, thread and base plate

1-1/4 or 1-1/2 in (33.7, 38, 38.1 mm O.D.; 26–48 mm to order), 24–36 in long (600–900 mm), base plate 120 x 120 to 200 x 200 mm (150 x 150 x 6 mm standard), zinc plated, hot dip galvanized or painted.

Also known as

Screw Jacks with Base Plate & Wing Nut are base jacks or leveling jacks in the US and base jacks in the UK, Australia and New Zealand; in other languages they are vérin de pied (French), Fußspindel (German), basetta regolabile (Italian) and husillo (Spanish).

United States: base jackleveling jackscrew jack
Australia & NZ: scaffold jackadjustable base
Français: vérin de piedpied vérin
Deutsch: FußspindelGewindefußplatteSpindelfuß
Italiano: basetta regolabile a vitebasetta regolabile
Español: husillobase regulable

Trade names for the whole range

How it works

Screw the stem to adjust the standard height

Set the base plate on the ground and place the standard foot on top. Thread the wing nut onto the exposed stem. Turn the nut clockwise or counterclockwise to raise or lower the standard until it stands plumb. The cast or forged wing nut is sized to turn by hand or with a key.

Screw Jack with Base Plate & Wing Nut This page
Choose the base jack for the foot of a scaffold: it stands each standard on a square base plate and levels the scaffold on uneven ground.
Hi-Load Screw Jack with Wing Nut
Choose the hi-load jack for falsework and shoring towers: its larger stem and U-head or fork head carry the beams under the formwork.

Common applications

Where it is used.

Application

Leveling standards on sloped or uneven ground

Cuplock bays must sit level even across terrain that slopes. Adjust each base jack independently to bring every standard plumb, so the scaffold level and the bays carrying ledgers sit true.

Application

Setting platform deck to working height

Platforms on tube-and-fitting scaffolds rest on support beams. Base jacks under each point of the support frame level the beams so the deck does not tilt, and set the platform to the height required for the job.

Application

Bringing concrete floors and surface variations in line

Ground conditions vary across the site: concrete floors settle, loose fill compresses, and soft ground shifts under load. The range of adjustment lets each standard reach a stable setting regardless of the surface beneath.

What is a scaffold base jack called in different regions?

Screw Jack with Base Plate & Wing Nut is a base jack, leveling jack or screw jack in the US, a base jack in the UK, and a base jack or scaffold jack in Australia and New Zealand. It is a vérin de pied in French, a Fußspindel in German, a basetta regolabile in Italian and a husillo in Spanish.

What sizes do scaffold base jacks come in?

Screw Jack with Base Plate & Wing Nut comes with 1-1/4 or 1-1/2 inch stems (33.7, 38 or 38.1 mm) and 26 to 48 mm to order, 24 to 36 inches (600 to 900 mm) long. The base plate runs from 120 x 120 to 200 x 200 mm, with 150 x 150 x 6 mm standard, and the stem can be hollow or solid.

Scaffolding & Shoring Systems

Part of cuplock and working-platform systems

Screw Jack with Base Plate & Wing Nut is the foot of each cuplock standard and the leveler of working platforms on tube-and-fitting frames. See how it works in the systems.

Explore scaffolding & shoring systems

Screw Jack with Base Plate & Wing Nut specifications