Product family
Pipework in a building or plant has to be hung, joined and drained. Corona makes pipe clamps and the threaded rod they hang from, stainless steel collars for flanged joints, and sump receivers that seat roof drains in the deck. Each part is made to the pipe size, thread, grade and finish the buyer specifies.
Enquire about this range
Where it's used
Water, drainage, heating and chilled water pipes run under floors and along ceilings on clamps hung from threaded rod. Rubber-lined clamps quieten the pipe and stop it rubbing. Pipe Clamps and Threaded Rods / Bars cover it.
Sprinkler mains and branch lines are hung from the structure at set spacings on rods and clamps. Pipe Clamps and Threaded Rods / Bars cover it.
Food, chemical and water-treatment plants run stainless pipe with flanged joints that can be opened for cleaning and maintenance. A collar welded to the pipe end lets a loose flange turn to line up its bolt holes. Stainless Steel Collars (For Flanges), Pipe Clamps and Threaded Rods / Bars cover it.
Flat roofs on steel deck drain through roof drains set into sumps in the deck. A sump receiver fills the opening cut in the deck and carries the drain body at the right level. Sump Receiver (Finish: Zinc Plated, Powder Coated) covers it.
Three families
Product family
The clamp around the pipe and the rod that hangs it from the structure.
Product family
Stainless collars welded to the pipe end so a loose flange can make the joint.
Product family
The plate that seats a roof drain in the deck opening.
Pipe support assemblies
HANGERS
A threaded rod drops from an anchor or beam clamp to a two-piece clamp around the pipe, and the nut on the rod sets the pipe to level.
Diameter: 1/4" - 2-1/2" / M6 - M60 · Length: 2 ft - 19 ft (3, 6, 10, 12 ft common) / 1 m - 5.8 m (1, 2, 3 m common)
SpecificationsNominal Pipe Size: 1/2" - 30" / 15 mm - 750 mm · Thickness: 0.120" - 0.790" / 3 mm - 20 mm
SpecificationsFLANGES
A stainless collar welded to each pipe end is clamped between a pair of loose backing flanges, which turn freely to line up the bolt holes.
ROOF DRAINS
A sump receiver closes the hole cut in the deck and carries the drain body, so the roof falls to the drain and water leaves the roof at its lowest point.
Questions answered
Complete product range
Each card shows the product role and first useful specification fields before the full detail page. Know a component by another name? Find it in the trade-names list.
Nominal Pipe Size: 1/2" - 30" / 15 mm - 750 mm · Thickness: 0.120" - 0.790" / 3 mm - 20 mm
SpecificationsNominal Pipe Size: 1/2" - 24" / 15 mm - 600 mm · Thickness: 11G, 12G / 2 mm, 3 mm
SpecificationsPlate: Square, 16 x 16 in to 24 x 24 in; to drawing / 400-600 mm · Opening: Raised round collar sized to the drain body
SpecificationsDiameter: 1/4" - 2-1/2" / M6 - M60 · Length: 2 ft - 19 ft (3, 6, 10, 12 ft common) / 1 m - 5.8 m (1, 2, 3 m common)
Specifications