Product family
Some steel parts never come off a standard list. Corona fabricates them to order: hand rails for platforms and stairs, recessed manhole covers that take block paving, post saddles cast into concrete footings, turnbuckle aligners that pull formwork into line, and other custom components. None of them has a stock size or a fixed specification. Each is cut, welded and finished to the buyer’s drawing, sample or requirement, and quoted for that order.
Enquire about this range
Where it’s used
Raised platforms, mezzanine floors, stair flights and walkways need guarding along every open edge. The railing has to follow the structure it is fixed to, so post positions, returns and stair rakes are set out from the site drawing. Fabricated Hand Rails do this work.
Where block paving runs over drainage and service chambers, a plain cover breaks the pattern. A recessed tray filled with the same pavers keeps the access point in line with the surface around it. Block Paviour is made for these surfaces.
Timber posts do better standing clear of the concrete and the wet ground around a footing. A saddle cast into the footing holds each post above the surface and takes bolts through its side plates. The Rebar Carport Saddle is built around that detail.
Formwork is set to a string line, then has to stay on that line while concrete is placed against it. Adjustable braces between the forms and the ground push or pull each face until it is plumb and straight, and hold it there through the pour. That is the job of the Turnbuckle Form Aligner.
Three families
Product family
Guarding for the open edges of platforms, stairs and walkways.
Product family
Steelwork that finishes in the ground, flush with the paving or cast into a footing.
Product family
Adjustable bracing that sets form faces to line before and during a pour.
Questions answered
Complete product range
These are custom products, so none has a stock size or catalog specification. Each one is fabricated to your drawing or requirement, and every product page leads to a quote. Know a component by another name? Find it in the trade-names list.
Custom product, made to your drawing or requirement.
Product detailsCustom product, made to your drawing or requirement.
Product details
Custom product, made to your drawing or requirement.
Product details
Custom product, made to your drawing or requirement.
Product detailsCustom product, made to your drawing or requirement.
Product details