Product family
Corona supplies the structural components for temporary formwork, fixed-form paving, reinforcement preparation and cast-in foundation work. Stakes and pins retain form edges and set line and level. Tie rods and nuts connect opposing form faces around a pour. Cut rebar and wire prepare reinforcement layouts. Dowel bars transfer loads across concrete joints. Anchor bolts set into foundations and receive base plates and equipment.
Explore concrete systems
What this range covers
Temporary forms rely on driven stakes to hold line and level before the pour. Round Stakes take beside timber or panel boards. Flat Stakes grip soft ground and board attachments. Rebar Stakes use a familiar driven profile for ground restraint. Square Stakes prevent rotation in soft soil or poor-grip conditions. Formwork Pins retain boards where driven positioning is needed.
Steel road forms hold the line and profile for concrete pavement, kerbs, channels and footpath edges. Each form section sits on grade and is secured by driven pins through a housing pocket. Round Stakes hold temporary edges next to the fixed form.
Reinforcement layouts use Cut Rebar cut to length and secured at intersections with Wire. Slabs, floors and cages are assembled before the pour. Cut Bars and Dowel Bars span concrete joints to transfer loads as slabs and pavements move.
Cast-in Anchor Bolts project through the foundation and carry the base plate connection through their threaded ends. Plate Washers under the nut distribute load on the bearing face. Threaded Rods provide a threaded interface for rod-and-plate assembly in foundation work.
Six product families
Product family
Driven stakes and pins hold temporary forms in line before the pour. Each profile—round, flat-sectioned, rebar-style or square—addresses different board types and ground conditions. Formwork Pins provide a holed retention option.
Product family
Form-tie assemblies hold opposing faces during a concrete pour. Tie Rods span the faces and take the horizontal load. Tie Rod Nuts engage the thread on each end, and Plate Washers distribute the bearing load on the wood or panel surface.
Product family
Cut Rebar is supplied to length for reinforcement layouts and slabs. Threaded Rods provide a threaded interface for rod-and-plate assemblies, suspensions or adjustable supports. Cut Bars and Dowel Bars transfer loads across concrete joints in pavements and slabs.
Product family
Steel Road Forms establish line and profile for concrete pavement edges, kerbs, channels and footpaths. Form sections link together and are held on grade by driven pins through the form housing.
Product family
Cast-in Anchor Bolts project through the foundation and hold the base-plate assembly through their threaded ends. Plate Washers distribute the nut load on the bearing face. Threaded Rods provide a threaded connection option for rod-and-plate assemblies.
Product family
Black annealed Wire (16 Ga) secures reinforcement and mesh intersections during reinforcement layout, before the concrete is placed.
Concrete systems and applications
TEMPORARY FORMWORK
Driven stakes hold timber, board and panel edges in line during preparation and the pour. Round and Flat Stakes address different board interfaces, while Rebar Stakes provide a familiar forming profile.
Diameter: 3/4, 7/8, 1 in / 18, 20, 25 mm · Length: 12-56 in / 300-1400 mm
Specifications
Size: 1-1/2 x 3/8 in / 35 x 9 mm · Length: 12-56 in / 300-1400 mm
Specifications
Diameter: 5/8-1 in / 16-25 mm · Length: 12-56 in / 300-1400 mm
SpecificationsFIXED-FORM PAVING
Steel Road Forms establish the line and profile for concrete pavements, kerbs and footpath edges. Form sections are held on grade by driven Road Form Pins, with Round Stakes used to secure adjacent temporary edges.
Diameter: 4, 6, 8, 10, 12 in / 100, 150, 200, 250, 300 mm · Length: 10 ft / 3 m
Specifications
Diameter: 1/2-1 in / 12-25 mm · Length: 12-56 in / 300-1400 mm
SpecificationsDiameter: 3/4, 7/8, 1 in / 18, 20, 25 mm · Length: 12-56 in / 300-1400 mm
SpecificationsFORM TIES
Tie assemblies hold opposing form faces during a concrete pour. Tie Rods span the gap under horizontal load. At each end, a Tie Rod Nut engages the thread and bears against a Plate Washer on the form face.
Diameter: 1/2-2 1/2 in / M12-M60 · Length: 3-20 ft / 1-6 m
Specifications
Diameter: 1/2-3/4 in / M12-M20 · Length: 3-20 ft / 1-6 m
Specifications
Finish: Black, zinc plated, hot dip galvanized
SpecificationsCAST-IN ANCHORAGE
Foundation and base-plate work uses cast-in Anchor Bolts that project through the foundation with threaded ends. A Plate Washer and Tie Rod Nut complete the connection. Threaded Rods provide an alternative threaded interface where required.
Diameter: 1/4-1 in / M6-M25 · Length: 6-60 in / 150-1500 mm
SpecificationsFinish: Black, zinc plated, hot dip galvanized
Specifications
Diameter: 1/4-2 1/2 in / M6-M60 · Length: 3-20 ft / 1-6 m
SpecificationsQuestions answered
Complete product range
Each card shows the product role and first useful specification fields before the full detail page. Know a component by another name? Find it in the trade-names list.
Diameter: 3/4, 7/8, 1 in / 18, 20, 25 mm · Length: 12-56 in / 300-1400 mm
SpecificationsSize: 1-1/2 x 3/8 in / 35 x 9 mm · Length: 12-56 in / 300-1400 mm
Specifications
Diameter: 5/8-1 in / 16-25 mm · Length: 16-56 in / 300-1400 mm
Specifications
Size: 5/8, 3/4 in / 16, 18 mm · Length: 12-56 in / 300-1400 mm
SpecificationsDiameter: 5/8-1 in / 16-25 mm · Length: 12-56 in / 300-1400 mm
SpecificationsDiameter: 1/4-1 in / M6-M25 · Length: 6-60 in / 150-1500 mm
SpecificationsFinish: Black, zinc plated, hot dip galvanized
SpecificationsDiameter: 3/8-1 in / 10-25 mm · Length: 1-12 ft / 300-3600 mm
SpecificationsDiameter: 1/4-2 1/2 in / M6-M60 · Length: 3-20 ft / 1-6 m
Specifications
Diameter (Round): 1/4-1 in / 6-25 mm · Size (Square): 5/8, 3/4, 7/8 in / 16, 18, 20 mm
SpecificationsDiameter: 1/2-2 1/2 in / M12-M60 · Length: 3-20 ft / 1-6 m
SpecificationsDiameter: 1/2-3/4 in / M12-M20 · Length: 3-20 ft / 1-6 m
SpecificationsDiameter: 4, 6, 8, 10, 12 in / 100, 150, 200, 250, 300 mm · Length: 10 ft / 3 m
SpecificationsDiameter: 1/2-1 in / 12-25 mm · Length: 12-56 in / 300-1400 mm
SpecificationsSize: 16 Ga / — · Finish: Black annealed wire
Specifications