Round Stakes

Round Stakes are driven steel stakes for temporary concrete forms. Specify diameter, length, point style and finish to match the ground and form-board installation on site.

At a glance

Round Stakes at a glance.

Definition

A round stake for temporary forms

A driven steel stake for temporary concrete formwork.

Application

Board and ground

The point enters the ground beside a board or panel form and holds the line in position.

Product form

Diameter, length and point

Round cross-section in 3/4, 7/8 and 1 inch diameters; lengths from 12 to 56 inches; sharpened or spade point, plain or coated finish.

Also known as

Round concrete form stakeRound form stakeSteel form stakeRound formwork stake

How it works

Driven beside the board

Position the stake against the form board and drive the point into the ground. Ground resistance and the stake's geometry lock the board line through concrete placement.

Common applications

Where it is used.

Application

Slab-on-ground edge forms

Secures temporary edge boards around slab-on-ground work and flatwork perimeters.

Application

Footing and foundation forms

Provides temporary board retention at footing and foundation form edges.

Application

Temporary layout and site positioning

Marks and holds form lines during concrete preparation and pour setup.

Concrete systems

Temporary form edge retention

Driven beside boards at slab, footing and flatwork edges. Flat / C-mouth, Rebar and Square Stakes serve different section profiles; Formwork Pins handle pin-driven setups.

Explore concrete systems ↗

Round Stakes specifications