A pin for Road Forms
A driven pin for the pocket or housing of a Road Form section.
Site accessories
Road Form Pins
Road Form Pins are driven pins for securing Road Form pockets and housings. They hold the form section to line and level during concrete placement.
At a glance
Road Form Pins at a glance.
Secures form to grade
The pin passes through the pocket or housing and into the ground, holding the form line and level.
Diameter, length and finish
1/2 to 1 inch diameter; 12 to 56 inches length; sharpened or spade point; plain or painted finish.
Also known as
Driven through form pockets
Align the pin with the Road Form pocket or housing and drive the pointed end into the ground. The pin holds the form section rigidly in place.
Common applications
Where it is used.
Fixed-form road and slab paving
Secures Road Forms during fixed-form road and slab pours.
Kerb and channel edge holding
Secures the form section at line and level for kerb and channel work.
Footpath and flatwork edges
Holds Road Form sections firmly at footpath, driveway and slab edge perimeters.
Form-pocket retention
Road Form Pins drive through Road Form pockets to secure the sections and hold line and level. Road Forms are the matching sections; Formwork Pins provide alternative hole-driven options.
Explore concrete systems ↗Road Form Pins specifications
Road Form Pins configuration
ParameterUS / PrimaryMetric / Additional
Diameter1/2-1 in12-25 mm
Length12-56 in300-1400 mm
FinishPlain, paintedPlain, painted
Concrete & Construction
